You are reading a single comment by @LardLover and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@LardLover
Tune Prince and Princess hubs
32 hole
15mm x 100mm front
12mm x 142mm rear
Recently built onto brand spanking new 700c DT Swiss RR411db tubeless rims. DT Swiss spokes in black (plain gauge rear, double butted front).
Tubeless rim tape fitted, will need valves though.
Hubs have previously been built up but never ridden as they were off a show bike. Rims, spokes, nipples, tubeless rim tape are all BRAND NEW. As mentioned, you will need tubeless valves (and tyres!).
The hubs alone would cost you well over £600.....! The rims, over £50 each, then add 64 black DT Swiss spokes, tubeless rim tape and wheel build for two wheels then you'll be looking at a price around (or over) £800!!!
Silly light; front is approx 670-680g, rear is approx 820-830g
Looking for offers around £450 posted (unless you're in the North East then you're more than welcome to pop round for them and save a bit more cash).