You are reading a single comment by @freezing77 and its replies.
Click here to read the full conversation.
-
Probably not the best solution as previously mentioned you need to increase the force to get a depth of cut. Tape round the steerer with just about any sort of tape, stops the saw slipping and you can mark the cutting line as a guide use a fine tooth hacksaw blade or use a junior hacksaw. £5 from screwfix. Or £2 from Wilko
https://www.screwfix.com/p/forge-steel-junior-hacksaw-6-/6247C?tc=BA4&ds_rl=1245250&gclid=Cj0KCQiAi7XQBRDnARIsANeLIev3TVAaRBdPdpPCQHjTjUZ2VBAS4UJQ_yYXclHwVCdnAXButw_vdOIaAkc0EALw_wcB&gclsrc=aw.ds&dclid=CKHmzPGOw9cCFVeA7QodZIIHxQ
freezing77
Fine to cut a carbon steerer with one of these? Most places seem to recommend a hacksaw