You are reading a single comment by @jdmitch and its replies.
Click here to read the full conversation.
-
very helpful - thanks! I have 282mm spokes and a Novatec hub too, so that will be perfect, just have to lace it 3x as you have done.
jdmitch-
Happy to build them for you if it frees up time for you to finish the GT AeroTr-hack ...
Vince
I did indeed, yes.
It seems that the rims have been at a tenner for the last 4-5 months.
ERD = 584mm
Lacing 3x - I used 282mm spokes with 12mm nipples for both front & rear. 280mm spokes would also work fine.
Here are my calculations using Novatec/Planet X/Formula/Joytec/System EX/Condor hubs (basically the majority of high flange hubs with sealed bearing :
Radial 262 Front 261 Rear
1x 264 Front 263 Rear
2x 272 Front 271 Rear
3x 282 Front 281 Rear
4x 294 Front 293 Rear but would overlap the hub flanges so not recommended.
Give or take a mm
You could also use shorter spokes and 16mm nipples.
I hope this helps...