You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.
  • Something with a handle and a locating pin: eg Bike Hand YC-126-2A.

    I doubt there's much to choose between them, so whatever your favourite retailer has in stock will be fine.

  • Something with a handle

    Something without a handle is better for mounting cassettes, because you can attach your torque wrench to it.

    and a locating pin

    Unless you ever want to use a hub with a solid axle

  • True, but the "nut" tool is a pain with a socket because you're applying the leverage further out. 40Nm is what I can apply with a lever that length, so on balance I prefer the tool with a handle.

    I don't think I've ever needed to remove a cassette from a wheel with a solid axle and without the pin you really need to use the QR to hold it in place, unless skinned knuckles and burred lock rings are your thing!

    I suppose the best solution is to have four, to cover all eventualities...

About

Avatar for gbj_tester @gbj_tester started