-
I used to do a lot of product shots for stuff I sold on eBay. very easy to set up for small things. I just had a large cardboard box, got a white mount board, curved to stick inside the box as the floor and back wall. cut the side walls out and put white paper over the holes. do the same with the roof of the box.
when shooting you can use 2 flashes shooting through the white paper but I found one flash pointing up at the roof and bouncing down on the subject was best/enough.
I can dig it out if you would like a set up shot.
got results like the one below. didn't need much post editing either.
Tape! Super sexy
But I'm keen to learn and buy kit so using this as an excuse
Here's what I'm aiming for: