Home DIY

You are reading a single comment by @Mr_Sworld and its replies. Click here to read the full conversation.

•

Dramatic_Hammer

This curtain rail is taking fucking ages... Mind you I'm on my own, only have one ladder and it didn't come with any sort of instructions. The double jointed connection pieces also make the whole thing much more difficult to work out the correct pole lengths.
Just realised I might have put the joints in upside down. Hmmmm.

•

Mr_Sworld in reply to @Dramatic_Hammer

The ladder should be at a 1 in 4 angle (75 degrees), that could slip out from under you and send you through the window.

Clear some space and use it in the stepladder configuration. Be safe...

•

Dramatic_Hammer in reply to @Mr_Sworld

It's at 60° with big rubber feet at each end. Could lean it against the boxed in section for a bit more angle but then I'd be leaning off it to reach stuff. Stepladder configure would have me standing on the top or second to top rung with nothing to hold onto :)

About

Avatar for Mr_Sworld @Mr_Sworld started