You are reading a single comment by @tomsvoboda and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
tomsvoboda
Fatbiker
For sale here is my custom steel Obree Old Faithful and Moser AX Leader hour record tribute frameset.
I had this built approximately 3 years ago by Kajak Custom. You can find more on the building proces on the current projects thread I did on it here: https://www.lfgss.com/conversations/256531/
The frame features 38.1 mm straight 0.9 mm straight gauge tubing for the main tube and the seat tube, and aero chain and seat stays. The fork features Columbus MAX fork blades.
Geometry chart is below, but the size is equivalent to a 57 cm standard road frame. The seat height is obviously fixed (currently 77 cm from the center of the BB tot the center of the seat rails). The seat post clamp is a separate part though, so an experienced frame builder should be able to take it off, cut down the seat post and fix it in place again.
The frame is in good condition. The paint shows a couple of mostly minor paint chips, scuff marks and scratches. There is some chain rub on the inside of the drive side chainstay. The chain tends to rub when in highest gear on wheels were the freehub is spaced very close to the dropout. You could indent the frame to prevent this, or simply refrain from using the highest gear.
I would like to get GBP 450 for the frameset including shipment to any country in the EU. I think I spent easily three times this amount.
Below are a couple pictures of the frame. More pictures in my Flickr album here.