You are reading a single comment by @Soul and its replies. Click here to read the full conversation.
  • I can have a stab at a couple of them... seeing as I have just had wet UFH installed and will be using Karndean

    1. I beleive not, you run your UFH through a manifold and separate thermostat, so would need a direct line into boiler
    2. No idea, we laid ours in 65mm of screed which is the best system as you then heat the pad
    3. Yes, but you need special adhesive
    4. No... Maybe
  • Cheers.

    I've found Ambichipboard which looks like it could be installed in as little as 28mm which means i could see a total install height of ~33mm max.

    I've done a bit of creative googling and apparently i could do something to connect to existing rad system by introducing a mixer to bring in lower temps but it's all a little above my head for the 10 mins of reading i've done so, if anyone has more info, i'd appreciate it!

    Glad to hear i might not be totally mental.

About

Avatar for Soul @Soul started