Wheelbuilding / Wheel Building / Wheel build help

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

fredtc

does anyone know whats the erd on the new Mavic Open Pro UST rims?

and relatedly, I've got a hub and spokes bought for a Hed Belgium rim (erd of 592). For reasons of carelessness I can no longer use that rim. Can I use a rim with an erd of 596 (such as a Kinlin XR22T) with the same hubs and spokes, if I use 16mm nipples instead of 12mm? Spokes and nipples are DT swiss if that makes a difference.

•

gbj_tester in reply to @fredtc

does anyone know whats the erd on the new Mavic Open Pro UST rims?

It's on the cycle clinic web site. The rest of your question was answered on the previous page, but the TL;DR of it is "buy new spokes", round ones are not expensive.

•

cycleclinic in reply to @gbj_tester

Having built with the OP now ERD is 293mm not 589mm as it say on the rim. silly mavic ERD measured with 12mm sapim brass nipples. I am not sure CX-ray are a good idea. I am going to delete that option from the builds. The stiffer sapim race/force is a better idea.

About

Avatar for gbj_tester @gbj_tester started