You are reading a single comment by @miro_o and its replies.
Click here to read the full conversation.
-
For those of you shooting half-frame, how do scans come back from developers (filmdev in particular) ? Do you get a scan of the full 35mm frame (ie two pics), or do they scan each half frame separately ?
Full frame ime.
Also, on a camera limited to 200 ISO, is there any benefit to shooting 400 ISO film and pulling to 200 in low light conditions ?
Considering taking the plunge into half-frame but the camera is limited to 200 ISO max.
There is nothing to gain from pulling c41 one stop.
Take note of the cameras lowest shutterspeed perhaps? If it is an old auto camera and in low light that's most likely what it will be firing at. That speed is critical in how you expose the film and steady the camera.
miro_o
For those of you shooting half-frame, how do scans come back from developers (filmdev in particular) ? Do you get a scan of the full 35mm frame (ie two pics), or do they scan each half frame separately ?
Also, on a camera limited to 200 ISO, is there any benefit to shooting 400 ISO film and pulling to 200 in low light conditions ?
Considering taking the plunge into half-frame but the camera is limited to 200 ISO max.