You are reading a single comment by @SideshowBob and its replies. Click here to read the full conversation.
  • Excellent thread. How long has it taken you to get to this stage and what are the waiting /drying times between coats?

  • Base coat dried for about 24 hours before adding the crackle. I crancked up the heat to about 30 Celsius. But the Montana paint dries quite quick anyways. The crackle paint (again, Montana) dried 24hours. Then 3 coats of clear on top of the decals. 2 min between the coats of clear. Again warm room, with pre heated rattle cans. Put them in medium warm water after shaking them. (Paint flows better.) I Also gently sanded with 800 grit paper where the decals was added before putting on the clear.

About

Avatar for SideshowBob @SideshowBob started