You are reading a single comment by @bnajo and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
MisterMikkel
@bnajo
@MisterMikkel the crankset asks for a 115mm JIS square taper, i had that BB-7400 that is 113mm and i tought it just would be right for that 1mm on each side! BUT, i noticed too late that's a JIS low profile... anyway it mounted and it doesn't move, fine but this could be the cause of the problem, even if being "low profile" should mean that the crank goes a little bit closer to the bottom bracket, not outer like it looks now? I'm probably wrong.
Chain line is now 47mm-ish~, tiagra front derailleur asks for 45mm.
@Batt that's what i tought on the first place, anyway i'll try this new position aswell.