You are reading a single comment by @ShutUpBlud and its replies.
Click here to read the full conversation.
-
I did learn that that was likely from not properly tightening my cog, and using cheap hubs. Do you think I could do it, if I used decent kit, decent tools, and a good quality hub? Anyway - If not a disc, I'll either build up a spoked wheel with a bolt on hub, or buy another Corima from a friend of mine.
ShutUpBlud
Either way, If you have a history of stripping threads from skidding you will most likely rip the hub loose from a disc if you skid on it.