• Help.

    I've replaced the pads on my TRP Hylex brakes. But both front and rear both sides, are rubbing. I've pushed the pistons back flat, centred the rotors and ridden the bike about 15 miles using the brakes frequently. But still they rub. Any suggestions to save my burning quads?

  • Did you open up the piston before fitting new pads?

    Sound like that the piston have auto adjust for the wear of the old pads, that when fitting new pads, it end up being too tight.

    Put old pads back on, pry it open as much as possible, then fit new pads in.

About

Avatar for edscoble @edscoble started