You are reading a single comment by @svenhöek and its replies. Click here to read the full conversation.
  • Thru axle conversion for Tri spoke:

    2 28x15x7 6902 bearings
    15mm steel tube
    another tube with 15mm I.D as sleeve between the bearings
    2 10mm/15mm endcaps from a Halo XCS singlespeed hub (matches perfectly with the trispoke hub but are 1.5mm to short... = 97mm)
    The omnium fork has room for a 10mm axle.
    2 1.5mm washers to make it 100mm

    I could probably squash the fork together to 97mm, because the extra washers are fiddly: Put trispoke + washers in fork, line everything up and insert thru axle.

About

Avatar for svenhöek @svenhöek started