You are reading a single comment by @hippy and its replies.
Click here to read the full conversation.
-
I tried changing them but didn't see any difference. Is there a reprocess button or something I'm missing? When I swapped to velomobile it redrew the route automatically.
Use the following switches to change behaviour
(1=yes, 0=no):
assign consider_elevation 1 # set to 0 to ignore elevation in routing
assign allow_steps 0 # set to 0 to disallow steps
assign allow_ferries 0 # set to 0 to disallow ferries
assign ignore_cycleroutes 1 # set to 1 for better elevation results
assign stick_to_cycleroutes 0 # set to 1 to just follow cycleroutes
assign avoid_unsafe 0 # set to 1 to avoid standard highways
assign turnInstructionMode 1 # 0=none, 1=auto-choose, 2=locus-style, 3=osmand-style
hippy
platypus
ok, so if you select the "vm-forum-velomobil-schnell" profile.
then scroll down to the code box.
look at these values for the penalties for various surfaces. you can then change them and recalculate the route (and the three alternatives BR always gives you). but these are a good default as they're for velomobiles!