You are reading a single comment by @freezing77 and its replies.
Click here to read the full conversation.
-
That looks pretty simple to make with handtools, a drill, hacksaw and file. Do you have any dimensions i.e. desired material and thickness, centre to centre distance of the two holes and their size?
freezing77-
Did think about doing it myself, but given my history with such projects it'll probably be cheaper to pay someone to do it, in the long run.
It's 15mm x 40mm (I'm making it a bit longer than the one above to increase surface area). Stainless steel 3mm thick should be strong enough. Holes are for M8 bolts, so 9mm diameter, and centre to centre between bolts is 16mm.
Jon.
who can machine me a few washers? dead simple, just need something that won't bend under lots of torque.
same as these, but without the $60 shipping charge for a 90 cents part.
Also, 1 1/8th Chris King O-rings - are they all the same? I've borked the cap o-ring on my inset headset and it seems to be creaking without it so it's probably an essential part i should replace.