You are reading a single comment by @SkipTown and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
SkipTown
TM
On mine what happened was the eyeless above the dropouts pulled out of the fork. The design is flawed because the eyelets have a lip but it's on the outside so doesn't prevent them pulling out. A good idea would be to procure longer bolts, a couple of nuts and some washers and bolt all the way through the eyelets and put a washed and nut on the back to sandwich the eyelet in the fork. Hope this makes sense.