You are reading a single comment by @sacredhart and its replies.
Click here to read the full conversation.
-
Looks like that immersion is linked to the timer, and the timer is set to 'timed' obvs question is it actually on? Check the timer.
sacredhart-
... and the timer is set to 'timed'...
I was about to reply "No it isn't, I don't use the timer, just turn it on & off via the switch on the right."
But looked again at the photo.
It seems the timer unit switch has "gone South": it slips down to the timed position.
I'll try taping it into position...
Thanks for the prompt and comprehensive reply!
Scilly.Suffolk
I've just had a new immersion heater fitted, but it's on the blink: only worked twice.
It heated a tank of water once, but not the next time: I reset it using the red dial.
Heated a second tank, but not a third: resetting hasn't solved the problem.
The plumber is in Spain and I'm starting to smell.
Any help gratefully received (especially by all I come into contact with).
@sacredhart