Rychtarski SSCX frame, fork and finishing kit.

Geometry based on a 57cm Ritchey Swiss Cross, front triangle is built from Columbus Max and the rear is Zona.

It's been sent back to Poland for a repair after cracking at the seat-clamp, so the frame has a brand new paintjob. Changes have been made to ensure it shouldn't happen again, but I've been using carbon paste and as little torque on the seatpost as possible to be sure.

Fork no. 1 is steel and uses a Pacenti Paris-Brest crown and needs a respray (or you could just ride it with the hammerite paintjob it currently has). Fork has been slightly amateurly drilled to take a fork-mounted hanger, but you can't see this once the hanger is fitted. Steerer has been cut down, so you're limited to 5mm under the stem. Clearance to match the rear of the frame.

Fork no. 2 is a Wound Up Team X fork in good used condition. Clearance is a bit tighter than the steel fork. The steerer allows for a bit more leeway with spacers than the steel fork.

Masses of clearance on the front and rear for either big tyres (I've had 1.95" tyres in there) or loads of room for mud come the cross season.

Happy to throw in some parts too, I've got a good condition 120mm Thomson stem, seatclamp and seatpost I will include, as well as a all black Chris King headset. If you want the Ultegra BB I can include that too.

Looking for £600 for headset, stem, seatpost, clamp, frame and two forks. Without the Wound Up I'd sell for £500. I might even be able to put together a full build, if needed.

Collection in N16.

Dibs wound up if you end up splitting :)

Cool looking frameset, glws!

2nd on that wound-up if you split. Exactly what I need right now...

Would you sell the stem and seatpost?

Slow on the reply but no real interest in selling those bits separately, sure I'll find a use for them sometime.

3rd dibs for WU forks