You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Howard
For ghetto first-timers: I used 19mm TESA tape on 17mm internal rims and it was just about right; running 35mm G-Ones. Front tyre went up straight away and held air at 60psi overnight. Rear tyre, I think I split the valve hole and it went up but was hissing fiercely; I redid the rim tape from scratch and it happened again, but it sounded like less air was escaping so I bunged in 60ml of Stan's goo, spun the wheel a few times and it's been fine since. Tl;dr: don't be afraid of small leaks around the valve when installing.
In terms of the tyres themselves, they're great. Running them at 45-50psi - not squirmy, great grip. They handle grit, gravel and smooth tarmac with aplomb. Can't do proper A/B test as now on an alu bike, but the ride is definitely nicer than 25mm Gators at 100psi on my former Genesis Equilibrium and I don't feel any slower. Was getting at least 1 pnctr/month on tubed tires; nothing in the months I've been running these.