-
• #99577
Paul, Surly, Phil, Mack and white industries make them.. And there are plenty 135mm track hubs you can convert to track/disc.. and you can always go disc single speed
-
• #99578
Paul and surly use a 51mm chainline, way off the 44mm of Force 1 cranks. Phil and mack are both custom (and incredibly pricey). White industries use stupid proprietary cogs AND use a 51mm chainline
-
• #99579
You're right, you need a new bike
-
• #99581
-
• #99582
-
• #99583
^ Saucy
-
• #99584
yes!
-
• #99585
-
• #99586
Nice.
-
• #99588
-
• #99589
Not sure about stem or chainring
-
• #99590
Not sure about stem
Grammo is generally pornworthy, but maybe not on a Nagasawa. The whole thing manages to be considerably less than the sum of its parts.
-
• #99591
This is SO nice. Lovely paint job and build.
Bar tape was thin in them days eh. -
• #99592
-
• #99593
Would prefer to see some
but I can understand! -
• #99594
-
• #99595
eeeee nice project ...
-
• #99596
-
• #99597
-
• #99598
This is truly beautiful!
-
• #99599
From CP
-
• #99600
:0 nice..
Sure, if you're brazing your own disc tabs or building a custom frame around a 120 hub. Won't work with 135 rear ends. I'm just salty nobody makes a fixed disc hub that will work on my Orlo (135mm sliders and Force 1 cranks)