You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
What are you using?
An OG Omega :)
Pushed somebody off this afternoon who had the same compatibility issue (Omega X + OG P2/P3) that you, Nutshell and @Sainsburys_Ed are suffering from. If there are enough others out there who want to tackle it seriously, it's probably fixable :)
2 Attachments
-
gbj_tester
-
Also interested but struggling to find a set of second hand omegas (either original or X).
-
If there are enough others out there who want to tackle it seriously, it's probably fixable :)
That would be ideal, but I think the cost would be prohibitive.
How much would another headset cover/hanger be? Is there a MOQ?
ewanmac
Scilly.Suffolk
Calling P3C owners!
a) I'm having trouble with the seatpost slipping. With assembly paste and a torque wrench, it needs 6.5Nm whereas 4Nm is specified. And that's just on the turbo, no pedalling.
It's a brand new frame: does the post or tube need roughening-up?
b) Using a TriRig Omega X with a no-hanger backplate. I have a Tektro steerer mounted hanger, but that needs a 10mm spacer under it to clear the nose on a 54cm frame.
What are you using? Does anyone know of hangers with more forward extension (the Tektro has 38mm)?
TIA