You are reading a single comment by @coventry_eagle and its replies.
Click here to read the full conversation.
coventry_eagle-
I put new metal pads in, loosened caliper, gripped brake and tightened caliper and the result is a fairly off-centre disc. It's like one of the pistons is moving more than the other. So I held the disc over to the moving side and the other side was definitely moving too, so I'm not sure what the issue is. I've now manually pushed the caliper over so the disc is more centered. It's gripping the disc though so basically already braking without touching the levers. There must be some trick I'm missing...
hippy
Yeah, they're worn so it was more noticeable but it's been doing it since TCR really. Actually they were worn pads too. Hmm... time to fit the sintered pads re-center calipers and see how that goes.