Any question answered...

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

PhilDAS in reply to @Scilly.Suffolk

I can add or subtract spacers to make it fit?
I'll measure what's on there and try and find something similar. It's an old stronglight number currently

•

gbj_tester in reply to @PhilDAS

I can add or subtract spacers to make it fit?

You can add spacers to make a lower stack height one fit, you can't subtract spacers if the new one has a higher stack than what you already have. For that, you'd need negative shims :)

There are two sizes of crown race too, you should have an ISO 26.4mm one, so beware of 27.0mm JIS headsets.

•

PhilDAS in reply to @gbj_tester

Ah of course. There's probably 20mm of spacer on there now so one with a little more stack should be fine too.

This is exactly why I was asking. I knew there was something like this. Cheers

About

Avatar for gbj_tester @gbj_tester started