You are reading a single comment by @MisterMikkel and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
MisterMikkel
Here's what I'm looking at so far.
Will probably make something that mounts above the headtube and hangs down to mount the top of the shock to, may move the bottom shock mount inboard a bit. Dropouts can't be used as is so will hopefully plasma cut new ones with integrated disc mount or try and utilise premade dropout and disc mount section of another donor fork.
Edit: Or do I just flip the shock mount around so the shock can lay flat, parallel to the top tube of the urt and mount the other end to the steerer/pivot area?