You are reading a single comment by @Kernowdreamer and its replies.
Click here to read the full conversation.
-
Bond or spot weld the allen key in
A small reversed drill bit straight through the centre might actually spin it out?
-
I removed a rounded off, torx /star headed bolt from a disc brake with one of these once
I used it the wrong way round, according to the instructions, but it worked. I had locktight on that too.
Howard
William.
@Kernowdreamer
Got this in today for attention.
French alloy frame from the 80's with a grubscrew holding the seatpin in place. The seatpin wobbles but wont come out so I need to remove it and check it all out. Someone has run the allen key recess ragged and the thread shows signs of loctite. Can I get this out without resorting to drilling and re-tapping?
1 Attachment