My original post was meant to be asking if anyone knew of any narrow 6 bolt rotors
What width is that? 1.7mm?
(on another note: I have shimed a center-lock rotor :) But that is probably not an example to follow...)
Not entirely sure. The difference between mine is only around 0.2mm, but enough for the thicker set to rub both pads
Great.... ahem ..but If you want people to help you maybe you should give some measurements/specifics/make so people can help you! :)
well I found this (from 2012 so everything could be wrong...)
Magura... 2.0mm Hope...1.60mm +0.05mm Hayes ...1.75mm to 1.78mm thick Shimano 1.8mm thick
http://www.velonews.com/2011/10/mtb/tech-faq-lennard-zinn-on-rotors-and-drilling-frame-drain-holes_252053
@Turkish started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
What width is that? 1.7mm?
(on another note: I have shimed a center-lock rotor :) But that is probably not an example to follow...)