-
I use the Supernova Triple front and have it wired to their rear light option:
http://www.supernova-lights.com/en/supernova-e3-tail-light-2Are you sure it won't work with E3 Pro 2?
"In use with an E3 Pro 2 front light and an SP hub dynamo, and it's a fit-and-forget joy"
http://road.cc/content/review/127121-supernova-e3-tail-light-2-dynamo-rear-light"There's a single button to turn the light on and off, and a wire for the dynamo with an output loop to link the E3 with a tail light."
http://road.cc/content/review/70888-supernova-e3-pro-2-dynamo-front-light -
Rear lights don't have the internal gubbins to regulate the power output from the dynamo so need to be connected in series from the front light. You cannot hook them straight up to the hub as this will damage the light. If you get the cheaper one then you will need to use a battery powered light out back.
You are reading a single comment by @boomboom and its replies.
Click here to read the full conversation.
hippy
Ramsaye
@boomboom
Anyone know anything about rear dynamo lights?
SJS do a Supernova E3 Pro 2 for £65, but it doesn't have a connector for a rear light. £100 less than the version that does have rear light connector.
Is there a rear light that I can purchase seperately that runs straight from the hub? And I presume it will be OK to wire in a front + rear + D1 all from the same hub (although not all will be running at the same time...).