You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Howard
hippy
Anyone tried using undersized bleed blocks or DIY bleed blocks to bring Shimano road discs free-stroke / lever-throw down?
https://www.shapeways.com/product/A9DAXVXWP/bleed-block-5mm?li=shareProduct
https://www.shapeways.com/product/NN5BKSGNJ/bleed-block-1mm?optionId=57888666&li=related-items
from: http://forums.roadbikereview.com/components-wrenching/shimano-r785-disc-levers-have-excessive-free-stroke-343759.html
With the pads a bit worn my levers are almost bottoming out. If I remove the wheel and squeeze them they reset to be too close so the brakes are 'on'. It's getting a bit annoying.