You are reading a single comment by @hamrack and its replies.
Click here to read the full conversation.
-
So I fitted the second stay. There isn't space for the mount (and nut) on the inside, at least on my driveside (YMMV as I have an alfine). Stacked two up on the outside and it works well enough, bit of pushing against the rack but nothing major. Might put a piece of rubber/insulating tape in there to stop it rattling/rubbing/fretting too badly.
Will report back as to whether it stop the rattling in the rear mudguard, hopefully it has as it spoils an otherwise quiet bike!
hamrack
Well my clearance thing is a side issue! Thanks, I look forward to seeing what you come up with. One each side seems sensible!