Clear out - PDW, Moots, Campag Record, Nitto, Alpina, Smud, Brooks, Kimori, Shimano, tyres, bits n bobs

Hi All,

It's clear out time. A few nice bits that were stashed, and some others that came on project frames that I've tired of moving around and tripping over.

All items are in cornwall, so prices + postage at cost.

any questions please ask.

ALL PHOTOS HERE

PDW Full Metal Fenders - SOLD
The 45mm larger "city" version (for up to 35c tyres?) sadly wouldn't fit my frame, so went with the narrower version and held on to these. As new with just a few light storage storage marks at worse. Excellent solid mudguards, been running mine for last few years and they've been flawless.

FSA Omega Compact handlebars - SOLD
Black
400mm (ctc)
31.8mm clamp
great shape and very comfortable bar. A few marks from lever clamps and a bit of tape residue which I'm sure i'll clean before sending.

Tufo C S33 Pro 24 tyres - SOLD
black/black. 24mm, tubular clincher style (fit clinchers perform like tubs apparently) both unused, one still in packaging, the other fitted (stretched to mount) but not ended up ridden.

Nitto SP72 (jag) 27.0mm Seatpost - SOLD
250mm length
standard 44mm rails
scratches from halfway down and light scratches/tarnished on rear upper section

Nitto SP72 (jag) 27.2mm Seatpost - SOLD
210mm length
standard 44mm rails
scratches from min insertion down

Bontranger finishing kit - SOLD
carbon seatpost - 27.2mm, 330mm length, scratches/surface marks from halfway down.
"select" stem - a-head, 110mm, 17 degree, dark grey/gunmetal finish, non-os bars.

Moots Stem - £50
130mm
6 degree
1-1/8" steerer
25.4mm handlebar clamp
stickers are coming off, but stem itself is clean. typical moots ti loveliness.

Alpina Track Fork - £75
700c
35mm rake
1-1/8"
283mm steerer
Not drilled for brake
as new condition, gloss version.

Smud carbon saddle - SOLD
ridiculously light (72g) and yet surprisingly very comfortable. Ive ridden a few of these carbon pringles and this is one of the nicer riding lightweights. 85kg rider limit. gloss weave and white logo. no damage.
bit of info HERE if you don't know of smud.

San Marco Zoncolan Saddle - SOLD
worn through on the nose edge and few scuffs on the sides, but solid to use on a beater.

Brooks cambium c15 saddle - SOLD
slate grey, standard railed.
Very clean condition apart from symmetrical chips in the edges of rubber on the underside (see pics) I assume from seat post clamp positioning from previous owner, however these are very solid saddles, so no problem in use and a cheap way to try before you commit.
wanted to try it, didn't suit me, next!

Kimori clamp on brake adaptor - SOLD
beautifully engineered thing and works well.

Dia Compe brs 101 brake adaptor - SOLD
clamp-on adaptor only. I have the caliper still, but it needs servicing, welcome to take it though.

Planet X Ti Stick QR Skewer - SOLD
Rear, Carbon lever, Black, excellent condition, very light. came with a hub, but i have no use for it.

Rotor BSA30 Wrench for BB Cups - SOLD
unused, comes with the english/italian threaded BB's and I have one already.

Ultegra CS6700 cassette x Dura Ace Chain - SOLD
10 speed
12t-25t
bit dirty, but will scrub up for you. It came with a group set which functioned fine, but i use 27t here in cornwall.

10spd Campagnolo Record Cassette - SOLD
10 speed
13t-26t
looks clean, but unsure of mileage as it came with a used record groupset and minus a chain. cs401 locking included.

10spd Campagnolo Record Rear Mech - SOLD
Again, came with a used groupset which I needed for shifters, front mech, etc, but already had a longer cage mech, so this is spare. In good used condition, with a small chip on carbon plate and few scrapes on the cage.

Tektro r200 brake levers - SOLD
ideal for fixed as they are spring loaded. old campag record "style" hoods. used condition with a few marks on the blades, but functioning as should. hood rubbers nice and tight.

Cane Creek cross top brake levers - SOLD
26mm clamp, black, excellent used condition and functioning as should, springs strong and adjusters present.

Shimano beater/project groupset - SOLD
600/105 components. came on a bike which was less than well looked after, but should be fine for project/beater us and when i rode it briefly things work as should/expected. certainly needs a bit of attention here and there.

105 flight deck shifters - st 5510 - 9 speed - well used with plenty of anodising/corrosion on blades. left lever has no return spring, but I'm assuming would be fine to use once cable'd up to a brake?
105 rear mech - 5510 - 9 speed - used but NOT abused
chainset - 600/6400 - rings need replacing, arms are scratched up a bit, but tapers and threads are good.
Brakeset - 600/6403 - solid brakes, japanese made shimano quality. front pads need replacing
Front Mech - 600/6401 - double, braze-on
bb included for english thread, but cups are corroded and will need a good clean, bb itself is sealed and feels very good.
bars - cinelli campions del mondo - 6644 - scratches, and surface marks from removal from stem, but solid enough.

Knog brazeless/rackless panniers - 20
excellent condition, bought and only used a handful of times at most. all the bits are present and the bags are in very good condition and very well made.

Garmin out front mount - SOLD
unused/new and in packaging came with 1000

Shimano pd-m530 spd's - GONE
came on a bike, i don't use spd's so no good to me. despite looking well used, they spin nicely

Beater pedals/straps/cages - GONE
right - mks rx-1 - njs/mks large cage/double straps
left - mks sylvan/mks large cage/double straps

Ortleib bar bag mount - free with anything
wire loop style.

dibs fenders and SPds

sent a pm

Want the skewer and zoncolan but funds do not allow. Hopefully nobody sees this and they're still here on pay day....

Dibs moots. Cheers and PM coming. T

@tomsvoboda moots stem

Dibs brooks cambium please, pm incoming...

Haha snap :)!

will send pm about the Cambium

Dibs crosstops and beater pedals/straps/cages

PM coming

(double-post)

just spotted somebody in front me with the cambium, so let me know if previous person doesn't take it. Ta.

2nds on the moots stem!! and 3rds the Cambium!! 2nds on the PDWs

Cheers,
Matt

Cobblers. Optimistic thirds - make that fourths - on the Cambium please.

Dibs silver tektro levers. Also will take SPDs if no one else has....

Pm'ing about the Garmin mount.

Dibs skewer

Smud and Zoncolan if not already spoken for please

dibs fender and crosstop (2nd)

@IR a nice nitto post here

Dibs zoncolan , pm me if still available

Dibs campy mech and cassette please

Dibs kimori adapter and 3rds on zoncolan

Thanks for all the enquiries and apologies for the delay, got quite a few messages there.

Thread (i think) is just about up to date, cheers!