You are reading a single comment by @TvH and its replies.
Click here to read the full conversation.
-
If you're aligning the caliper using the squeeze lever and tighten technique I've found it can often be a little off. I tend to do mine by eye.
TvH-
I've found it can often be a little off.
So did I, usually because the bolt often move the calipers when tightening up, which is a bit annoying.
a tiny dabs of copper slips between the washer and bolt work reasonably well.
-
I aligned it by eye first, rub was worse. Then did it by caliper squeeze and it was mostly better...
edscoble
TurtleRecall
Yeah it's a steady light rub all the way around. Wheel still spins freely. Have re-centred caliper with the brake on. Test ride with him tomorrow, see how we get on.