You are reading a single comment by @JesperXT and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@JesperXT
I don't like hammering in headsets, so I had to bodge a solution as I didn't have two M10 nuts. Ended up using a M10 and something that threaded half a turn unto the threaded rod. Worked out fine after a bit of back and forth. Cut the crownrace with an angle grinder, as the Cane Creek SC-1 uses sealed bearings anyway.
