You are reading a single comment by @edscoble and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
edscoble
I've just installed my new sram omnium crankset onto my Cinelli mash work frame.Its a Std 68mm BB. I've greased all parts as per normal setup. Once I've tightened the non drive side with the Allen key (not with a tourque wrench as I don't have one ) there still seems to be some lateral play .Ive remove the crank arm and retightened it but there still seems to be the same play. I know I need a torque wrench and will borrow one but I've done up the bolt pretty tight .Am i missing something ? There were no spacers in the crankset kit so I assume I don't need any either ?
Cheers Ja