You are reading a single comment by @matteroftaste and its replies.
Click here to read the full conversation.
-
If you slightly undo the red cap (undo the nut, release 1/8 of a turn anticlockwise and redo allen nut) you unload the bearings slightly. DON'T over-tighten the allen bolt... its a tiny and fragile thing.
It's a good idea not to have too much load on the bearings as they will wear out quicker... sometimes Miche put too much load on them
ugosantalucia
@matteroftaste
Hi guys.
I've got a miche primato rear hub that doesn't spin freely. This happens both loaded and unloaded. The wheel is virtually new and has had roughly 50 miles on it.
Is this a loading problem or something I can expect to brake in?