You are reading a single comment by @edscoble and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
edscoble
No. 75DD axle is 24mm at both bearings, like Shimano. Omnomnoms us a GXP axle which is 24mm on the drive side and 22mm on the non-drive side. The method of axial location is different, Sugino and Shimano use a sliding fit spline with end float adjusted by the left crank bolt and locked by cinch bolts to clamp the spline. GXP uses an interference fitted spline with the NDS bearing trapped between the left crank and a shoulder on the axle to eliminate end float.