You are reading a single comment by @MCamb and its replies.
Click here to read the full conversation.
-
Will Sram Omnium Cranks be compatible with Sugino 75 DD bottom bracket?
No. 75DD axle is 24mm at both bearings, like Shimano. Omnomnoms us a GXP axle which is 24mm on the drive side and 22mm on the non-drive side. The method of axial location is different, Sugino and Shimano use a sliding fit spline with end float adjusted by the left crank bolt and locked by cinch bolts to clamp the spline. GXP uses an interference fitted spline with the NDS bearing trapped between the left crank and a shoulder on the axle to eliminate end float.
gbj_tester
@MCamb
Cross posting from the bottom bracket thread...:
Will Sram Omnium Cranks be compatible with Sugino 75 DD bottom bracket?
Thanks!