You are reading a single comment by @paradroid and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
paradroid
edscoble
Thanks for the tips and support everyone!!! @kjlem thanks for the (horrible :P) link and the awesome book suggestion. @fussballclub I'll take a look, thank you! @Tijs Camping in the wild it is, although I don't intend to bivvy in a ditch every night ;) @edscoble I'd love to but it's just not on the way and I plan to start working on my master's degree in 2018.
Love all the book and reading suggestions, keep 'em coming!
Now on to wheelbuilding
I'm pretty much sold on the Ambrosio AK30 rims. The front wheel will be a 36h Shutter Precision PD-8-01 laced to the AK30 rims in combination with DT Swiss Alpine III Triple Butted spokes. But I'm still struggling with some things:
For the front I need lengths of 254.5 on the NDS and 255.7 on the DS, got the measurements from the Ambrosio website and the hub dimensions from the SP website
For the rear I need 255 mm on the NDS and 253.7 on the DS, got the Shimano FH-M756 dimensions from FreeSpoke (can I trust this source?)
Am I correct in thinking I would need for the front
18x 254 and 18x 255
and for the rear
18x 254 and 18x 253
255 and 253 mm DT Alpine III's are about half as cheap from Rose, 254 mm only available at Bike24. Can I get away with using 253 mm spokes on the front instead of 254's and 255's on the rear instead of 254's?