You are reading a single comment by @snottyotter and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@snottyotter
At least a week. There are 2 5mm Allen bolts attaching the calipers to the bike, loosen them off a bit then move the caliper side to side until the pads are the same distance from the rotor on both sides, you need to look down through the caliper to check this, usually with something light behind it. If there is no clearance and they are hydros you probably pressed the lever with the wheel out and will need further instructions.