You are reading a single comment by @gillies and its replies. Click here to read the full conversation.
  • Is that basically right?

    The light power cable will go to your light before it goes to the Igaro - you need a splitter or to put two sets of wires into the dynamo clip. Do you have a long enough stem to run cables out of? Do you have anything else on the stem?

    Will the hub be able to charge/power the light at climbing speeds?

    Yes, no, maybe.

  • I'll have a 110/120 stem. Was probably going to have the igaro under the stem. Gonna have to think about how i want my cockpit and the front light to set up.

    Is there a particular splitter that is well thought of? A link would be appreciated cause I've literally no idea what i'm looking for.

    As for powering up the hills - not a huge problem as I'll have a head torch with me that I can whip out if the front light isn't working.

  • I made my own with some of these together with some excess cable from a B&M light, some heatshrink and the relevant soldering gear. I actually replaced all connectors with these as they're much neater/positive in their connection.

About

Avatar for gillies @gillies started