You are reading a single comment by @chiroshi and its replies.
Click here to read the full conversation.
-
This is actually the case. Pads are chamfered, so that should sort itself out as the pads wear.
Still I checked alignment etc. and found out, that the mount seems to be correct.
Still the pads overlap the top of the disc by 1-1.5mm
On the old pads one of them built a "lip" where the disc wore into them. Can't be that good?
Still - I know of no way to actually bring the caliper closer to the disc.
Murphy's_Law
@chiroshi
Some pads will also have a chamfer on the bottom edge to help you get the disc in and out which will affect the contact area.