You are reading a single comment by @Sumo and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Sumo
Just spent an unhappy hour trying to install some tubeless. I just can't see how I'm supposed to get the bead to seat.
I'm using S-ones on a set of Alex rims, however when installed with no air in it the tyre sits low in the rim bed with several mm of space between the bead and the internal edge of the rim. I've tried manic pumping and loads of bubbles, but air just flows out freely. I've tried using an inner tube to at least get one side of the tyre seated but as soon as I deflate the inner tube both beads appear to come away from the rim again.
I haven't tried with CO2 or a compressor yet (lost the head of my CO2 pump and will try making a compressor this evening) but even with the increased pressure I can't see how the air won't instantly flow out of all the gaps?