For Sale: Stem cap with integrated spacer

Had to take some fine sandpaper to the inside of my bearing cover to take the anodising off; wouldn't slide over steerer otherwise. But very nice and light. Not exactly the right diameter for my bike, as discussed, but actually looks very clean anyway. Cheers!

You must have a big steerer, everything in the last few batches has been bored 0.1mm over the nominal steerer diameter to avoid the tight fit of the early ones.

I've always found this to be the case when my compression bung was installed too tightly.

Steerer bung installed to torque spec... No problem though!

1.Scunny - JLWCC -Type 2
2.Cv - LOVE IS MY FOUNDATION - Type4

Dry is fine, but carbon assembly paste won't do any harm if it puts your mind at rest.

Thanks for confirming!

Amazed nobody's done this yet but I'll just leave this here

wouldn't slide over
You must have a big steerer
always found this to be the case [...] when my bung was installed too tightly.

1.Scunny - JLWCC -Type 2
2.Cv - LOVE IS MY FOUNDATION - Type4

@Scunny 's cap will be going in the post tomorrow, along with the rest of this batch, so the actual list is:

1. @conservative_values - LOVE IS MY FOUNDATION - Type4
   
   

Needs at least 20 to justify making more blanks, others who might want to join the list are @Sparky @danstuff @amey @T.D.C.of_Sams

1. @conservative_values - LOVE IS MY FOUNDATION - Type4
   
2. @danstuff - 'Z' at the top, 'P' at the bottom, colons at the left and right, diagram attached - Type 1
   
3. @danstuff - Brommers Bikes - Type 2
   
4. @danstuff - Brommers Bikes - Type 2
   
5. @danstuff - Brommers Bikes - Type 2
   
   

1 Attachment

I am keen, can I provide EPS or some other vector format?

Excellent work guys. Keep em coming

can I provide EPS or some other vector format?

Yes, I can handle EPS

Brommers Bikes

Is that Brommers|Bikes as before?

1 Attachment

Yes please. Forgot how the formatting works, but yes.

@conservative_values - LOVE IS MY FOUNDATION - Type4
@danstuff - 'Z' at the top, 'P' at the bottom, colons at the left and right, diagram attached - Type 1
@danstuff - Brommers Bikes - Type 2
@danstuff - Brommers Bikes - Type 2
@danstuff - Brommers Bikes - Type 2
@Turkish - Blank black anodized

(I dont know how to copy paste lists)

I dont know how to copy paste lists

I think that's a fault with the way the site handles markdown.

@conservative_values - LOVE IS MY FOUNDATION - Type4
@danstuff - 'Z' at the top, 'P' at the bottom, colons at the left and right, diagram attached - Type 1
@danstuff - Brommers Bikes - Type 2
@danstuff - Brommers Bikes - Type 2
@danstuff - Brommers Bikes - Type 2
@Turkish - Blank black anodized
@Ricochet - Rusl Susl - Type 2 in 1¼" size pleazzze

are these just standard size for any frame??

are these just standard size for any frame?

The default size fits 1⅛" forks, and also works if you use a 1⅛" stem with a shim on a 1" fork. Caps for 1" or 1¼" stems are available at extra cost.

Ace! I'll have a go at photoshopping a simple design. Is there a preferred format for engraving?

@Cycliste doesn't like my ZP design, so a change to the list:

@conservative_values - LOVE IS MY FOUNDATION - Type4
@danstuff - Brommers|Bikes - Type 1
@danstuff - Brommers|Bikes - Type 2
@danstuff - Brommers|Bikes - Type 2
@danstuff - Brommers|Bikes - Type 2
@Turkish - Blank black anodized
@Ricochet - Rusl Susl - Type 2 in 1¼" size pleazzze

Is there a preferred format for engraving?

2-colour .png based on the template file in the first post. Fancy-pants engraving may be extra, depending on complexity.

Got any Type 3s going?

Got any Type 3s going?

I have one each of 1" and 1¼" in plain black which could be made into a Type 3 or 4, but there are no 1⅛" caps of any kind at the moment.

@conservative_values - LOVE IS MY FOUNDATION - Type4
@danstuff - Brommers|Bikes - Type 1
@danstuff - Brommers|Bikes - Type 2
@danstuff - Brommers|Bikes - Type 2
@danstuff - Brommers|Bikes - Type 2
@Turkish - Blank black anodized
@Ricochet - Rusl Susl - Type 2 in 1¼" size pleazzze
@T.D.C.of_Sams - BRISTOL~ image attatched - Type 3

1 Attachment