My fork has no hole tapped in the front, so the crown support tab had to run over the fender through to the back
The rack (esp. the part nearest the canti posts) would flex like crazy with anything heavier than a sixer of beer on it
One NYC winter was enough to crack the alloy mounting tabs at the canti posts and render the thing truly useless
It was excellent at collecting snow to pack around my front brake
It wasn't even very light
Installing the Wald basket as it comes was literally an upgrade on every level. The handlebar tabs are so sturdy, they create a really stiff link that you can hang a shitload of weight from. The struts have been redesigned enough times at this point that Wald have pretty much no competition making these things.
Let me guess; is your basket is zip-tied to your rack, Prolly-style?
One more question if you don't mind... How wide is that wald basket and how wide are your bars? According to the wald specs the basket is 38cm wide, and I measured the gap between my (42 cm) drops to be approximately 38cm. A bit tight!
I had a rack somewhat like that;
The problems with it were:
Installing the Wald basket as it comes was literally an upgrade on every level. The handlebar tabs are so sturdy, they create a really stiff link that you can hang a shitload of weight from. The struts have been redesigned enough times at this point that Wald have pretty much no competition making these things.
Let me guess; is your basket is zip-tied to your rack, Prolly-style?