You are reading a single comment by @Chak and its replies.
Click here to read the full conversation.
-
That's not right. Should be no spacers at all, and cups flush to frame with a solid 4mm between stay and spider. I'm running a 50t ring with plenty of space for bigger.
Try different crank if you have access to or send back to Dolan.@TomvanHalen between the BB and spider? If so, that's normal. If I remember on another thread, Tester might have said that the DS is machined to stop at a certain point as not to compress the bearings, leaving a little space between spider and bb.
Chak
TvH
From what I understood the spacers are only for wide axles or smaller shells, and it's not advised to use them.
Here's without spacers.