You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
Armrests up by 3.0mm... need to commit further DIY in order to get them back down.
Surely you can just bend the stem down a bit more
gbj_tester-
I've tried but the stem's increments are quite coarse, and at that sort of angle one bump equates to around 10mm of height difference.
Stem can be a bit creaky, though, so I'm in the market for something different anyway, now I'm reasonably happy with the position.
Waiting for a reply from a seller on here about something that will give what I'm looking for, after making a few geometry sketches.
After that, should just be a case of swapping out risers, and maybe making some DIY carbon spacers, to get everything back to preferred height.
Lukas
Thanks @umop3pisdn :-)
Looks decidedly less aero with bottle in situ as is always the case.
Pretty happy with how it turned out, but made a mess of the kitchen. Carbon dust hangs in the air, so has thinly covered everything inside each kitchen cupboard, despite the doors being closed. Mystery illness/10
Armrests up by 3.0mm (2mm BTA + 1mm Tester STS cover - not pictured) so need to commit further DIY in order to get them back down.
@Eingang maybe later, if I remember.