You are reading a single comment by @Mr_B and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Cupcakes
@Mr_B
@Cranky Frame is painted, with rattle cans. Fork is a complex sandwich of Plasti-Dip & paint, described at length in this thread. Seatpost & stem are rattle-canned, I did the seatpost down to the minimum insertion point and the paint was thin enough not to make any difference.
@Cupcakes 32mm Paselas under 45mm Longboards. Not sure if 35mm would work - clearance under the seatstays is tight, even with the wheel so far back in the track ends.