I have the seatpost battery and the handlebar mounted gear indicator (which Im assuming is the junction box), the shifter is Shimano's own alfine gear and brake lever
this one http://www.artscyclery.com/Shimano_Alfine_S705_Di2_Shifters/descpage-SHDI2SLALF.html
which most seem to say isn't compatible..
I have no idea what a clutched mech is..
@danb
I have no idea whether a narrow wide chainring will fit the crankset I'll use on the bike... Would like to reuse as many components where possible..
What crankset do you have? Then we can help.
Right now it's the shimano alfine crankset, was going to put some sugino 75s on there... Bit concerned about the lack of 144bcd chain rings though..
@andyp started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I have the seatpost battery and the handlebar mounted gear indicator (which Im assuming is the junction box), the shifter is Shimano's own alfine gear and brake lever
this one
http://www.artscyclery.com/Shimano_Alfine_S705_Di2_Shifters/descpage-SHDI2SLALF.html
which most seem to say isn't compatible..
I have no idea what a clutched mech is..
@danb
I have no idea whether a narrow wide chainring will fit the crankset I'll use on the bike...
Would like to reuse as many components where possible..