You are reading a single comment by @spinnnout and its replies. Click here to read the full conversation.
  • I'm sorry that I'm probably the millionth person to get stuck with SKS Chromoplastics but..

    My fork is awkward, the mount points are quite high up (above the brake and inside the fork) but that's ok, have pushed the poles through. Now how do I mount he guard on back side of the fork, it's deep and not flat either. The provided screw isn't long enough and having it on the front just throws all the angles off and it rubs.

    Is it as simple as go to a hardward store and get a really long screw? May go have a peak around Condor tomorrow... https://cdn.shopify.com/s/files/1/0858/4882/products/0000004290_0e20d7d8-3d31-4b70-9b96-648d235eb6cf.jpg?v=1468234934

  • Long screw needed, a lots of bike now come with super thick fork crown that SKS et all haven't gotten the memo and supply longer bolt.

  • Are you sure it wouldn't rub anyway if you have the mudguard eyelet at the back of the fork crown?

    My kinesis has similar mounting points on inside of fork legs and I had to bend the metal stays a lot so they were straight by the time they hit the mounting points on the guards. If they're just straight surely they're pulling the guard at a weird angle?

    My ones:

  • I have a spare 70mm bolt you can have, needed it to mount my fork mounted cantis stop and mudguard

About

Avatar for spinnnout @spinnnout started